HRC PRO High Pressure Washer Machine: Power, Precision, and Profitable Cleaning by Manmachine Works
Keeping vehicles and their surfaces impeccably clean is essential not only for aesthetics but also for long-term protection. Traditional cleaning methods—buckets, brushes, and garden hoses—often leave behind micro-film, embedded grime, and residues that dull the finish and can damage surfaces over time. That’s where modern high pressure washer machines make all the difference.
Manmachine Works, a trusted leader in professional car wash equipment, presents the HRC PRO High Pressure Washer Machine—engineered to transform your cleaning routine with consistent pressure, optimized flow, and operator-friendly ergonomics. Whether you run a commercial car wash or want professional performance in your workshop, the HRC PRO series delivers superior cleaning made simple.
Why Choose the HRC PRO?
The HRC PRO is built around a clear promise: more clean in less time, using fewer resources. It pairs a high-efficiency motor with a precisely tuned pump to deliver the right blend of pressure and flow for deep, thorough cleaning without unnecessary abrasion. The result is a finish that looks brighter and lasts longer—wash after wash.
Standout Advantages at a Glance
- Real cleaning power: Up to 1900 PSI class performance with 11–12 L/min flow rates for confident dirt removal.
- Time savings: Cuts scrubbing and dwell time, turning multi-step jobs into streamlined passes.
- Finish-safe results: Even, stable pressure reduces risks of marring compared to abrasive manual methods.
- Operator comfort: Quick-connects, balanced lance length, and a responsive trigger reduce fatigue.
- Business-smart: Lower water use, faster cycle times, and durable components protect margins.
Superior Cleaning Made Simple with Advanced Technology
The HRC PRO Car Washer Machine integrates motor and pump engineering that unlocks dependable day-to-day performance. A high-pressure pump delivers consistent output to lift stubborn contaminants—traffic film, mud, grease, brake dust—out of crevices and textured surfaces. Combined with the right foams or detergents, the jet penetrates badges, grillework, wheel barrels, underbody edges, and door jambs where sponges simply can’t reach.
- Max class pressure: up to 1900 PSI
- Optimized flow: 11–12 L/min for rinsing volume that carries loosened grime away
- Finish-friendly rinsing: Stable stream helps minimize swirl risks versus manual wiping
The upshot: less effort, more consistency, and a visibly cleaner, glossier surface with every wash.
Two Proven Variants to Match Your Setup
HRC PRO 11.11 ET (Single Phase)
- Car wash capacity/day: 10–15
- Pressure: 110 bar
- Usage: Commercial
- Flow rate: 11 L/min
- Weight: 29 kg
- Power: 3 hp / 3 kW
- Voltage/Frequency: 220–230 V, 50 Hz
Best for: Small to mid-scale facilities, detailing studios, workshops, and mobile operators that need professional pressure performance on single-phase power. Delivers reliable daily throughput with low learning curve and easy portability.
HRC PRO 12.13 ET (Three Phase)
- Car wash capacity/day: 15–20
- Pressure: 130 bar
- Usage: Commercial
- Flow rate: 12 L/min
- Weight: 29 kg
- Power: 4 hp / 3 kW
- Voltage/Frequency: 230/400 V, 3-50 Hz
Best for: Busy wash bays and service centers with three-phase supply that require higher throughput, slightly higher working pressure, and longer continuous duty cycles.
Transform Your Routine with High Pressure Technology
Scrubbing for hours is yesterday’s workflow. With HRC PRO, you’ll:
- Shorten cycle times: The jet breaks the bond between dirt and surface fast, which reduces dwell and manual agitation.
- Improve consistency: Even pressure distribution helps you achieve the same quality across panels, wheels, glass, and trims.
- Raise customer satisfaction: Clean, streak-free finishes with better edge and crevice results are instantly noticeable.
For operators, that means more cars per shift and less operator fatigue—critical for profitability and staff retention.
Optimize Efficiency for Any Job
The HRC PRO is tuned for versatility—from delicate badges to stubborn wheel grime.
- Interchangeable nozzles: Use the 0° nozzle for precision blasting (emblems, seams, wheel barrels) and the 25° nozzle for panel-safe coverage and rapid rinsing.
- Flow + pressure synergy: The 11–12 L/min volume keeps contaminants moving away from the finish, preventing re-deposit.
- Adjust on the fly: Dial down for fragile trims or older paints; push power for under-chassis and wheel wells.
Pro tip: Pre-foam with a pH-appropriate detergent, rinse with the 25° nozzle, spot-target with 0° where needed, then finish with a final sheet-rinsing pass for minimal spotting.
Designed for Effortless Use
Everything about the HRC PRO is built to make the job easier:
- Quick-connect system for fast setup and teardown
- 10-meter hose for reach around larger vehicles without constant repositioning
- Ergonomic gun with quick-connect for smooth trigger control
- 500 mm lance for ideal stand-off distance and safe leverage
- 100-micron inlet filter helps protect the pump from particulate contamination
These details add up to fewer pauses, cleaner technique, and less operator fatigue across long shifts.
Built to Last: Durability, Safety, and Lower Cost of Ownership
Manmachine Works designs equipment for commercial duty:
- Quality internals: Pump components and seals specified for consistent pressure and long service intervals.
- Thermal and electrical safeguards: Protect the motor and operator in demanding environments.
- Serviceability: Straightforward maintenance access keeps downtime low.
- Parts & support: Readily available spares and responsive technical support keep your lane open.
Over time, that means lower maintenance cost, fewer breakdowns, and a better ROI than consumer-grade machines that wear out under daily use.
Water, Chemical, and Energy Smarts
Efficiency is profit. The HRC PRO helps you control inputs without sacrificing outcomes:
- Water: Focused jets and proper nozzle selection reduce overall consumption vs. open-hose washing.
- Chemicals: Effective mechanical action means less chemical load needed to break films.
- Energy: Right-sized motors avoid waste while still delivering commercial-grade performance.
Combined, these savings support greener operations and stronger margins.
Where the HRC PRO Excels
- Professional car wash bays increasing hourly throughput
- Detailing studios demanding finish-safe, swirl-minimizing rinses
- Dealership prep and PDI lines where speed + consistency matter
- Fleet & workshop maintenance needing dependable, daily performance
- Mobile detailing (11.11 ET variant) on single-phase supply
Best-Practice Tips for Flawless Results
- Pre-rinse to knock off loose grit.
- Pre-foam (pH-appropriate) to soften bonded contaminants.
- Rinse with 25° for panels; spot with 0° on tough areas at safe distance.
- Work top-down and panel by panel to prevent re-deposition.
- Final rinse at a greater stand-off to encourage water sheeting.
- Dry with clean microfiber or forced air to minimize spotting.
ROI That Makes Sense
Even accounting for a slightly higher upfront investment than light-duty models, customers consistently see returns through:
- Faster cycle times → more vehicles per day
- Lower rewash rates → better customer experience
- Reduced consumables → controlled water and chemical spend
- Fewer failures → lower maintenance overhead and downtime
In short, cleaner cars, faster turns, happier customers.
Specifications Summary
HRC PRO 11.11 ET (Single Phase)
- 10–15 cars/day · 110 bar · 11 L/min · 29 kg · 3 hp / 3 kW · 220–230 V, 50 Hz
HRC PRO 12.13 ET (Three Phase)
- 15–20 cars/day · 130 bar · 12 L/min · 29 kg · 4 hp / 3 kW · 230/400 V, 3-50 Hz
Standard Accessories (both)
- 10 m hose pipe · Quick-connect gun · 500 mm lance · 0° & 25° nozzles · 100-micron filter
Conclusion: Make Clean Simple—with HRC PRO
If you’re ready to replace inconsistent manual washing with fast, finish-safe, and professional results, the HRC PRO High Pressure Washer Machine is the upgrade that pays you back every single shift. From its balanced pressure-flow performance to its operator-friendly hardware and durable construction, HRC PRO helps you wash better, faster, and more profitably.
Choose Manmachine Works HRC PRO and unlock a new level of cleanliness—effortless, repeatable, and built for business.
Get the HRC PRO or enquire now:
🌐 Visit: https://www.manmachineworks.com/hrc-pro
📞 Call: +91-82-52-300-400